And Çetin
Drivetrain failure in electric BMWs

Drivetrain failure in electric BMWs

"Drivetrain failure" is a warning familiar to BMW drivers, but this problem naturally occurs for completely different reasons in electric models than in internal combustion models.

Among BMW's EVs, the i5, where this problem is most common, has been sold in Türkiye since 2023 in three different versions: eDrive 40, xDrive 40, and M60 xDrive. All of them, especially the 2024 models, carry a significant risk of causing an accident.

What happens?

Regardless of speed, the car first begins to stall, and a warning appears on the screen saying "Drive failure, pull over." The warning then either disappears, or after 20-30 seconds, the car loses power, remains on the road, and locks itself. Even if the warning disappears, it can reappear a few kilometers after starting off again. Some users have experienced this problem four times in a year, each time stranded and waiting for hours for a tow truck. Those who take their vehicles to authorized Borusan service centers receive responses such as "sensor failure," "battery feeder component," or "air conditioning system replacement required." Sometimes, the vehicle is returned with a software update, but the problem reoccurs. Some users have been stranded 500-750 km and request a new vehicle, only to be offered a "free PPF coating." In resolved cases, the process takes from one to three months to diagnose, procure parts, and repair.

This problem isn't unique to the i5; some owners of i4 and other electric BMWs have also experienced this stranding, leaving their vehicles stranded in service centers for weeks. As a reminder:

According to the Consumer Law, repairs performed at authorized service centers cannot exceed 45 business days. If this period is exceeded, the consumer has the right to request a replacement or a refund.

The source of the problem

In June 2025, more than 70,000 BMW EVs were recalled in the US by the NHTSA due to this issue (B12 09 25 / 25V-395). Affected models and model years:

  • iX / 2022-2024
  • i4 / 2022-2024
  • i7 / 2023-2024
  • i5 / 2024
  • i4 eDrive40 / 2025
  • i4 eDrive35 / 2025
In electric and hybrid vehicles, the high-voltage system (battery and drive components) must be isolated from the chassis and continuously monitored to prevent risks such as electric shock, short circuits, and fire.

According to the official statement, the electric motor software can cause the high-voltage system to erroneously shut down, causing the vehicle to lose power. This occurs when the software incorrectly detects a "double isolation condition." In this case, the software displays a red warning message on the instrument cluster approximately 15-20 seconds before cutting power.

While NHTSA states that shutting down the high-voltage system does not affect steering assistance or braking, it adds that if it occurs while driving, it can increase the risk of a crash.

Analysis shows that the vehicle software cannot distinguish whether the perceived hazard is truly a "double isolation" (i.e., requiring the high-voltage system to be shut down) or merely a "single isolation" (i.e., a temporary condition). To prevent the risk of electric shock, the software shuts down the high-voltage system completely in this ambiguity, cutting off the drivetrain.

Solution

Updating the electric drive motor software (Gen5 eDrive / HEAT software) is required at an authorized service center or via an internet connection (OTA/Over-the-air).

Sources

5 Comments

  • Mehmet  |  1 month ago
    2026 model i5 eDrive40 sahibiyim, 10.000 km’yi yeni geçtim ve şu ana kadar her hangi bir sorun yaşamadım, trim sesleri konusunda kulaklarım hassasdır ve bunu bu sınıfta hiç bir araçta kabul etmem mümkün değil , bu araçta da arada ufak tefek trim sesi duyuyorum sadece , beynimin bir köşesinde duruyor malesef, belki de araç çok sessiz ve dış sesleri içeri az aldığından kaynaklı bana öyle geliyor olabilir.

  • Cem Topdemir  |  8 months ago
    Bmw servisinin vermediği bilgiyi net şekilde aktardığınız için teşekkürler.

  • Ali  |  12 months ago
    Benim de i4 aracim tahrik arızası verdi son 3 ayda 4-5 kez ama her seferinde geçti kullanıma devam edebildim. Servise götürdüm serviste testler esnasında arac kilitledi ve sorun aks kesmesi oldugu ortaya çıktı motoru kontrol ettiler ordada yag içerisinde capaklanma mevcut şimdi motor ve aks değişecek 8 gün sonra ikame arac vereceklerini söylediler bekliyoruz

  • Bay logar  |  12 months ago
    Bu, yazılım güncellemesi ile tamamen çözülen bir sorun mu?

  • Ahmet  |  1 year ago
    Gerçekten çok kapsamlı ve anlaşılır bir analiz olmuş. Elektrikli BMW’lerdeki tahrik arızasını hem teknik hem kullanıcı odaklı şekilde açıklamanız çok iyi. Özellikle izolasyon algılama hatasını ve çözüm sürecini bu kadar net anlatan pek içerik yoktu. Emeğinize sağlık, faydalı bir kaynak olmuş.

Leave a Comment