And Çetin
1.2 PureTech’s fight for survival

1.2 PureTech’s fight for survival

The 1.2 PureTech unit, created by the PSA Group in 2014 with the idea of placing the timing belt inside an oil reservoir to reduce friction and improve efficiency, probably became the most controversial engine in modern automotive history. The “wet belt” concept had actually been used earlier in Ford’s EcoBoost engines as well and, as we all know, it did not produce very encouraging results there either.

In the end, both companies eventually gave up on this obsession and switched back from a wet belt to a chain: Stellantis has been using a chain since 2023 in its hybrid-assisted 1.2 Turbo models with the e-DCS6 transmission, while Ford has been using a chain in its 1.0 EcoBoost vehicles since 2020.

What was the problem?

Because the material used to produce the timing belt could not withstand the high temperatures reached by the oil it was immersed in — above 110°C — this system, which in theory was supposed to extend the belt’s life, had the exact opposite effect: over time, the timing belt would wear down and either eventually snap, or broken-off pieces would clog the oil filter, causing the engine to suffer bearing failure.

To eliminate this problem, Stellantis updated the timing belt material three times at different points, the latest being in 2021–2022. Users, meanwhile, should do the following to minimize the risks mentioned above:

  • Use the specific engine oil recommended by the manufacturer,
  • Change the engine oil before reaching 10,000 km,
  • Replace the timing belt at most every 50,000 km / 3 years,
  • Have the sump checked and cleaned during this process.

Alternative solution: Chain conversion kit

For those who do not want to deal with all this and simply want to use their cars with peace of mind, a Dutch company has introduced a kit that converts 1.2 PureTech engines using a wet belt into chain-driven units.

The company, called Pro Chain, offers two different kits for naturally aspirated and turbocharged 1.2 PureTech engines. Pro Chain, which says deliveries will begin in the second half of 2026, states that this kit requires no modification to the engine and that installation is as easy as replacing the belt. The conversion kit includes all required components, including the chain, sprockets, guides, tensioner and oil feed line.

However, the company sells only to automotive businesses, wholesalers and repair shops, and requires a company name, address, website and VAT/business registration number for order applications; it does not process individual requests or open accounts for end users.

The kit’s retail price is €829 + 21% VAT = €1,003.09. Once labor, distributor margin, import costs, shipping and taxes are added, its price in Turkey could plausibly reach 100,000–150,000 TL at independent workshops. Authorized services, on the other hand, will likely not want to assume warranty/responsibility for a non-OEM conversion kit.

Goodbye 1.2 PureTech

To comply with the upcoming Euro 7 standards, Stellantis appears to be preparing to abandon the 1.2 PureTech altogether rather than revise it once again, switching instead to Fiat’s turbocharged gasoline FireFly engines — also known as GSE, or Global Small Engine — which use a timing chain.

In fact, the current Peugeot 208 in Brazil had already been using a FireFly unit for some time. We had previously covered this 1.0-liter, three-cylinder engine — also used in Turkey in the Fiat Egea and 500/500X models — in an earlier article. FireFly also has two additional four-cylinder versions with 1.3- and 1.5-liter displacements, used in models such as the Alfa Romeo Tonale, Jeep Renegade and Compass.

Although this transition may appear to solve the problems, the fact that the e-DCS6 hybridized dual-clutch transmission — which is the main mechanical issue in current Stellantis models with the 1.2 engine — will also be transferred to these new engines suggests that not much will actually change: this troublesome gearbox, developed by Punch Powertrain and integrating a 21 kW electric motor, came under Stellantis control in 2025 and is currently produced in Metz and Mirafiori.

UPDATE: According to the latest reports, Stellantis has announced that the current EB2 Gen3-coded 1.2 PureTech has been made compatible with Euro 7 standards and will continue to be used in the models it currently powers after 2027. On the other hand, the fact that the Fiat-derived FireFly/GSE engine family is also being prepared for Euro 7 strengthens the possibility that Stellantis may run the two engine families in parallel across different models and generations in the future, rather than replacing PureTech with a single engine altogether.

9 Comments

  • Murat  |  1 week ago
    Zincire geçmek mantıklı çözüm olacaktır eat8 şanzıman ile kafanız rahat uzun yıllar binilir ama yağlı kayış heran patlamaya hazır bomba gibi bişe…

  • ERHAN  |  3 months ago
    Bu motoru toplamda 100000 km civarı kullanmış birisi olarak, özellikle öneriler kısmını çok doğru buluyorum, kendi adıma yağ değişimlerini 12-13bin km civarı, triger değişimini 60bin civarı yaptım ancak takibini yapamayacak olan kullanıcı risk almamalı. Zaten her araçta da yıpranma eşit düzeyde olmuyor.

  • ATILLA  |  5 months ago
    2020 Peugeot 2008 kullanıcısı olarak faydalandığım güzel bir yazı teşekkürler. Aracımdaki durum ise şöyle, 6 yıl 42000 Km herhangi bir deformasyon olmadan yağlı kayışı kullandım. Stellantis'in çok markalı servis ağı Eurorepar Car Servisinde kayışı geçen hafta tedbiren değiştirdim.

  • burak  |  5 months ago
    yatak kırmış bir c3 sahibi olarak acıyla okudum.

  • babur karaoğlu  |  5 months ago
    Bence sorun çoğunlukla benzin hava karışımının segmanlardan aşağı sızıp motor yağını uf etmesinden kaynaklanıyor. (uf etmek eşittir compromise) Beş binde bir üç bin tl verip yağınızı değiştirirseniz (TotalEnergies Quartz Ineo HTC 5W-30) elinizden geleni yapmış olursunuz. Yani ben öyle yapıyorum.

  • And  |  6 months ago
    Makale güncellenmiştir, geribildirim için teşekkürler Emre.

  • R İlbey Uğur  |  6 months ago
    Teşekkürler, harika bir yazı

  • Abdulkadir  |  6 months ago
    Birilerinin hala yazı yazması çok güzel, teşekkür ederiz.

  • Emre  |  6 months ago
    Abi selamlar, 1.2 Puretech'in Euro 7'ye uyumlu olmadığı ve kısa vadede (En azından 2030 yılına kadar) yerine 1.3 FireFly'ın geçeceği yalanlanmış: https://www.italpassion.fr/en/stellantis/eb2-gen3-engine-compatible-with-euro7-standards-stellantis-announces-that-its-puretech-engine-will-continue-after-2027/

Leave a Comment